Touchmatik have two options, either you can continue using the same mechanical switches and Touchmatik will provide you the electronics that fits behind the mechanical switch box so that you can operate your switches by a Remote or App or by Voice command.
The second option is, you can use Touchmatik smart touch switches using the existing wiring.

You can connect a maximum of 16 touch switches with 15 loads in 8 to 12 module concealed boxes.

The concealed boxes produced by any manufacturer are compatible with Touchmatik standard modules, for Example: 2M, 3M, 4M, 6M, 8M, and 12M. Switchboard combinations can also be made in 12M and 18M. There is a provision for sockets, which can be customized as per requirements.

Touchmatik switches operate under humid weather condition, are splash proof and also shock proof with a facility of child lock with Tuya model. 

• Easy to use
• Energy saving

• Light control 

• HVAC control 

• Create scene & mood 

• Access from anywhere

• Schedule switches_ON/OFF 

• Touchmatik touch switches can be operated with a Finger touch, Remote, Mobile App, or Tablet. The light brightness and fan speeds can be adjusted, and all the switches on the board can be turned on and off with single touch. Touchmatik products are easy to clean, easy to install, and easy to repair. Additionally, all switches are splash-proof. 

Touchmatik switches functions between 90 to 270 volts AC supply. On the other hand, if there are unregulated power supply inputs, the touch switch acts strangely

The switches operate with the relay, through that, you can connect...

a) Relay Load up to 16A 230V AC (Other manufacturers provides only up to 5A to 7A)

b) Dimmer Load - up to 100Watt, 230VAC, leading edge phase cut TRIAC dimming.

c) Fan Load - up to 100Watt, RC based Humming free fan regulation.

d) Curtain Motor up to 150Watt.

The switch board overlay can be designed on any Di-electric material like 3mm Toughened Glass, Acrylic, Wood, Corian, Marble, Stone, Textile with thickness of less than 5mm. 

Yes, after a power failure, the touch switchboard restores the last status of switches. Additionally, the switches status recovery function can be enabled or disabled onsite, by easy setting through the touch switchboard. 

The consumption is 0.1008 unit for max 8 nos of touch switches per day, so approximately one board will consume 3 units in standby condition per month. 

No, these are as simple to use as your conventional switches. Incase if you face any problems during installation, an instruction manual is provided with the product. The installation must be done by a licensed electrician. Alternatively, you can watch our YouTube channel link as below: 

https://www.youtube.com/watch?v=hae1DPP74Ak

Touchmatik switches connect to the cloud and mobile application via Wi-Fi, operating on a 2.4 GHz frequency band. 

Touchmatik App cloud server is Digital Ocean and it is located in Bangalore, India. 

Yes, it is works on both Android & iOS

If the internet signal is not received, you can still use the App on Wi-Fi LAN using the offline mode 

Yes, Touchmatik switches can be controlled using Amazon Alexa & Google Assistant skills. 

Yes, you can operate Touchmatik switches using an RF Remote. The Remote works on a 433MHz RF frequency band and operates on 2 x AAA battery cells. Its operating range extends up to 30 feet.

The Kinetic Switch is an energy-harvesting device that operates on the 433MHz RF frequency band and does not require a battery. It can operate without electrical wiring and works by connecting the actual load wires with the Kinetic Switch Receiver, with an operating distance of 30 feet, it is suitable for various environments, including outdoor and bathroom areas, as it is 100% waterproof with an IP67 rating, allowing it to function even underwater for maximum 30 minutes. 

We recommend you to install the mechanical switches connected to your essential loads these can be hidden and can be used during unexpected failure of switches board and delay which may be Touchmatik caused to rectify the fault.

Yes, Touchmatik switchboard support Two way switching in all models. (One switch in all models)

Yes, by using our Touchmatik App you can do the scenes and scheduling. 

Touchmatik provide 24 months plus 6 months for installation warranty against any manufacturing defects observe in the switchboard. The locations Touchmatik which are not served by our local agency, should bear the 1-way transport cost.

Touchmatik provides 6A and 16A sockets with C type, USB and HDMI ports. 

Yes, with the ON/OFF function only. Development is in process to make BLDC fan operate the speed through switches. 

Yes, Only in 6M and 8M models. 

Yes, Touchmatik provide glass protection cap. 

Yes, you can control the AC by Touchmatik App with the help of IR Blaster. 

Yes, Touchmatik switchboard have up to 4KV surge protection. 

Yes, the Touchmatik switches status is easily identified with the dual-coloured LED indication. Additionally, switches may be easily located in the dark with backlit LEDs. 

 Absolutely, Customized printing is possible on Touchmatik switchboards. Glass, PMMA, High-quality self-adhesive vinyl film material are available, and we have In-house printing resources available to satisfy client needs.

Yes, Touchmatik switchboard provide several safety features including:

a) Shock-proof design to prevent electric shock hazards. 

b)Child lock feature to prevent accidental operation by children. (Available on Tuya based App).

c)Incase the glass breaks, it remains intact with the switchboard due to the use of toughened glass. 

Recommend using a stabilized supply and UPS for reliable operation. Generator power supply is not recommended. 

RF Remote battery takes approximately 1 hr for 100% charging, after that the Remote will work around 9 days with daily 3 to 5 operations.

Yes, for that Touchmatik will provide you the insertable switchboard with provision to change the switches symbol on the same switchboard.