Designer Switch " RUBY " :

With 15 Switch + Master / 12 Switch + 1 Fan + Master / 9 Switch + 2 Fans + Master

A perfect combination to complement the modern lifestyle, standing out sharply from conventional switches.

Our Ruby model is a must have switchboard on the wall. A pleasing to the eye profile with switches for control of multiple operations is a demanding product from our product basket with an assurance of safety with a class of luxury and convenience. You Dream it, We do it..!!


Work with the switches designed on Wood. Perfect match for your furniture can be designed on the veneer or ply of your choice.


Enjoy our switches with the wallpaper of your choice. You can now blend Touchmatik switches with your interiors.


Feel the soft touch of the switch with your memories inbuilt. May it be your own photo, a family picture or a collage, we will design the switches with it for the walls..


A rare combination for the switches...? Yes!

We do the switches on the Marble/Corian material too.


Conference Rooms
Banquet Halls

Product Features

  • Designed icons for the switches.
  • Design feasibility of sizes and material.
  • Execution in any material viz.. Wood / Marble / Wall Paper / Glass.
  • Maximum Number of Switches :- 15 nos. + Master Switch.
  • Switching Combinations available with Fans.
  • 12 Switches + 1 Fan + Master.
  • 9 Switches + 2 Fans + Master.
  • 15 switches + Master
  • Soft touch operation with Remote controls and Mobile App.

Technical Specification

  • Input Voltage :90 to 270 VAC 50 Hz.
  • Protections: Input over voltage cut-off, Short circuit, Thermal & Overload Shutdown.
  • Working Temp: 00 to 500Deg. C.
  • Operating Humidity:20% to 85% RH non-condensing.
  • Rated Load:Tungsten and Halogen light 500W.
  • Capacitive Load: LED and CFL 100 W.
  • Inductive Load:Fan and Motor 65 W.
  • Service life:50,000 operations (for Relay).
  • Output :- 6 keys + 1 Master.

Product Display

Recommended Products

Door Bell

Installation Guidelines

Remove the black plate from the Switch Board.
Strip off 10 mm(approx 1 cm) of the load wire ends that are to be connected. Note that excess stripping will load to shorts between two wires.Connect the load wires as per the stickers mentioned on the box.Ensure that there are no wire strand protruding outside the connectors.
Align the loose cables in the concealed box properly. Please the switch board over the conceal box.
Screw fit the switch board to the conceal box (Use the screws provided along with the switch board). Ensure that there is no stress on the load wire connections and box fitment.
Check the whole assembly by switching on the loads one by one.Press fit the top black cover plate to the switch board.
Ensure the proper fitment of the swtich board vertically and horizontally.check the whole switch board functionally. Check the switch board for Remote operation if applicable.

Note : All Switches are compitable with Remote Control / Alexa / Google Home / Smart App ( Andriod / IOS ). Integration & Installation of above attracts extra cost @ actual.